1.
. Untuk Gatway pada setiap router di ambil dari
gatway komputer yang terhubung pada router tersebut.
2.
Setting CLI Pada Setiap Router :
Router0
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.1.0 255.255.255.0
Router(config-router)#network 192.130.9.0 255.255.255.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.9.2 (FastEthernet1/0)
is up: new adjacency
Router1
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.9.0 255.255.255.0
Router(config-router)#network 192.130.10.0 255.255.255.0
Router(config-router)#network 192.130.2.0 255.255.255.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.10.1
(FastEthernet0/0) is up: new adjacency
Router2
Router#ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.10.0 255.255.255.0
Router(config-router)#network 192.130.11.0 255.255.255.0
Router(config-router)#network 192.130.12.0 255.255.255.0
Router(config-router)#network 192.130.13.0 255.255.255.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.11.1 (FastEthernet1/0)
is up: new adjacency
Router3
Router#ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.11.0 255.255.255.0
Router(config-router)#network 192.130.4.0 255.255.255.0
Router(config-router)#network 192.130.3.0 255.255.255.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.11.2
(FastEthernet1/0) is up: new adjacency
Router4
Router#ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.5.0 255.255.255.0
Router(config-router)#network 192.130.6.0 255.255.255.0
Router(config-router)#network 192.130.12.0 255.255.255.0
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.12.2
(FastEthernet0/0) is up: new adjacency
Router5
Router>ena
Router#ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.13.0 255.255.255.0
Router(config-router)#network 192.130.7.0 255.255.255.0
Router(config-router)#network 192.130.14.0 255.255.255.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.14.2
(FastEthernet1/0) is up: new adjacency
Router6
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router eigrp 100
Router(config-router)#network 192.130.14.0 255.255.255.0
Router(config-router)#network 192.130.8.0 255.255.255.0
Router(config-router)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#copy run start
Destination filename [startup-config]?
%DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 192.130.14.1
(FastEthernet0/0) is up: new adjacency